Drawing ballooning

Drawing ballooning for AS9102 FAI — without sending drawings out

How mid-market aerospace and defence shops can balloon drawings and build AS9102-style FAI packages while keeping controlled drawings on site.

By QuickFAI Team ·

Why ballooning and FAI packages consume quality engineer time

Primes and tier-1 customers rarely accept a loose PDF of notes. They expect a structured first article package: characteristic numbers tied to drawing callouts, measured values, and forms in an AS9102-style layout their quality systems already know.

On a busy floor that means marking up every dimension that belongs in the package, keeping balloon numbers stable across revisions, matching CMM or hand-gauge results to those characteristics, and rebuilding the protocol when engineering issues a redline mid-job. None of that is optional for AS9100 shops — and it does not scale from a blank spreadsheet on every job.

In-house measurement protocols; drawings stay on site

Cloud FAI tools can be convenient for low-sensitivity commercial work. For defence and many aerospace programmes, ITAR, customer IP clauses, and internal security policy make that path hard to justify. Quality and IT often agree on one rule: controlled drawings do not leave the plant.

QuickFAI is designed around that constraint. Ballooning and protocol assembly happen where your drawings already live. You are not asked to upload print packages to a third-party SaaS just to get characteristic lists and forms out. That is the core offer for mid-market aerostructures and machining shops: the same FAI discipline primes expect, without sending drawings out.

CMM import into a structured report

Ballooning alone does not finish the job. Metrology has to land in the same structure: import CMM (or other) measurement output, map results to numbered characteristics, produce a customer-ready package when the programme requires it, and re-open ballooning when a drawing revision invalidates part of the list.

QuickFAI focuses on that loop — CMM import to structured characteristics to protocol and FAI forms — with ballooning available when the job needs it. The goal is fewer hand-offs between the CMM station, the quality engineer’s spreadsheet, and the final customer package.

  • Import measurement output into the protocol
  • Map results to numbered characteristics
  • Produce AS9102-style forms when required
  • Revisit ballooning after drawing revisions

Ballooning when the job actually needs it

Not every inspection is a full AS9102 first article. Some jobs need a full ballooned drawing and form set; others need a tighter measurement protocol against a known characteristic list. The software should support both without forcing a heavyweight process on every work order.

When a revision hits, balloon numbers and characteristic maps are where time is lost. Keeping that map next to the drawing and the CMM import reduces the “start over in Word” cycle that mid-market quality teams still run too often.

Worked example · fictional part

From drawing callout to inspection characteristic

The same requirement appears on the drawing and in the table. Balloon 3 identifies the hole diameter: 8.50 mm with a ±0.10 mm tolerance. This illustration explains the workflow; it is not a customer drawing or a product screenshot.

120.00 ±0.0575.00 ±0.05Ø8.50 ±0.10ILLUSTRATIVE PART · UNITS: mm · NOT TO SCALE
Before: source requirements, without inspection identifiers.
120.00 ±0.0575.00 ±0.05Ø8.50 ±0.10ILLUSTRATIVE PART · UNITS: mm · NOT TO SCALE123
After: numbered requirements, ready for inspection planning.
Illustrative inspection rows · all dimensions in millimetres
BalloonCharacteristicRequirementMeasuredResult
1Overall length120.00 ±0.05120.02Pass
2Overall height75.00 ±0.0574.98Pass
3Hole diameter8.50 ±0.108.65Out of tolerance